
Your side sewer is the pipe that carries everything from your house out to the city sewer main in the street. Most people never think about it until a drain backs up, the yard starts to smell, or a plumber’s camera shows a crack full of roots. Whether you’re in Burlington, Mount Vernon or Roy, here’s a plain-language guide to what goes wrong, what fixing it involves, and how Baxter’s Excavation handles the digging. Questions about your line? Call or text us at 360-899-8468Text us.
Who owns the side sewer?

In most Washington cities, the property owner is responsible for the side sewer from the house to the connection at the public main, and sometimes that includes the part under the sidewalk or street. Rules vary from one city, county and sewer district to the next, so check with your local public works or sewer department. If you’re on a septic system instead of city sewer, this article isn’t about you, but we can still help with excavation for septic work.
Signs your side sewer is failing

- Slow drains in more than one fixture, especially the lowest floor
- Gurgling toilets or sewage backing up into a floor drain or tub
- A sewer smell in the yard or a soggy, extra-green patch over the line
- Roots found every time the line gets snaked
- A camera inspection showing cracks, offset joints, a belly (sag) or a collapse
Older homes around Western Washington often have clay or concrete pipe with joints that tree roots love. Our wet ground and settling soil can also shift pipe over the years.
Repair or replace?
A camera inspection usually decides it. A single broken section in an otherwise sound line can sometimes be dug up and repaired. When the line has roots at many joints, a belly, or old pipe that’s breaking down along its length, replacing the run is often the better long-term fix. We’ll look at the video with you and talk through the options before any digging starts.
What the work looks like
- Locate and plan. We find the line, mark utilities (Washington’s free 811 call-before-you-dig service), and plan the dig to keep damage to your yard, driveway and landscaping as small as we can.
- Permits. Most cities and counties require a side sewer permit and an inspection before the trench is backfilled. We handle the permit with your city or county for you.
- Excavate. We dig the trench, shoring it where needed for safety.
- Lay new pipe. New pipe goes in at the right slope so waste flows the way it should, with proper bedding underneath.
- Inspect and backfill. After the inspector signs off, we backfill, compact and clean up.
New side sewer connections
Building a new home, adding an ADU, or switching from septic to city sewer? A new side sewer connection is part of the job. We handle the excavation and pipe work and coordinate with your builder, plumber and the city or county.
Where we do side sewer work
We’re based in Burlington and do side sewer work across five counties:
- Skagit County: Burlington, Mount Vernon and nearby
- Snohomish County
- Whatcom County
- Island County
- South Pierce County: Roy, Spanaway, Puyallup, Tacoma, Bonney Lake and Buckley
Not sure if you’re in our area? Call or text 360-899-8468Text us.
Why call an excavation contractor?
Side sewer work is mostly digging: getting down to the pipe safely, working around other utilities, and putting the yard back together. That’s what we do every day. Baxter’s Excavation is Licensed & Insured (WA Contractor Reg. BAXTEET811JA), with 20+ years of experience and 11 years in business.
Ready to get your line looked at? Call or text 360-899-8468Text us or request a free estimate.